Best Things to Consider When Purchasing a Toilet

FOF discussion only. Do NOT post help questions here!
This topic is 9 months and 2 days old. Instead of replying, please begin a new topic, or search for another related topic that may be more suitable.
Posts: 1
Joined: April 15th, 2018
Reputation: 0

Best Things to Consider When Purchasing a Toilet

Postby producer123 » Sun Apr 15, 2018 2:13 pm

Best Things to Consider When Purchasing a Toilet

There are various sorts of best flushing toilets to select from in the market today. Purchasing the bathroom can be expensive, as it's possible to get water bills prices and plumber debts. The most significant variables to consider when choosing the bathroom comprise: Configuration, Bowl Size, Rough-in Dimension, Flushing System, Height, Color and Design.

Rough-in Dimension:

The very first matter to consider is the rough-in dimension, which measures the distance of the flushing toilets. Ascertain whether your bathroom is 10", 12", or 14" rough-in. 12" rough-in has become the most popular size in United Estates. More tip: Best Flushing Toilet Reviews | Top 8 Most Powerful Flushing Toilet of 2018 - toiletszones
Bowl Size:

The next thing is bowl dimensions. In a bathroom, space can be saved by a round bowl, although Many men and women locate toilet bowls to be comfortable. Elongated toilet bowls step around 31" in the walls, while around fixtures maximum out in 28". Comfort comes toilet chair rim heights into play. Many manufacturers offer bathrooms that quantify a couple inches taller than normal 15" fittings.

Setup -- One Piece, Two Piece or Wall Mounted:

There are currently flushing toilet forms out there. There is, in A bathroom the cheapest choice. A toilet,with an can be more expensive, but these components are easier to clean since they don't have any seam. Bathrooms add a toilet and drama, and cleaning beneath them is a cinch. But this fixture could be expensive to install because it takes a wall home the tank and to mount the bathroom, along with upkeep that is potential could need reopening the walls.

Flushing System -- Flush Valve Size, Trap-way Dimensions & Water Consumption:

Once the toilet is flushed, the valve controls the flow of water also is that the opening in the base of the toilet tank. In general, the bigger the flush valve that the greater the flush operation will be (a 3 inch flush valve is thought to be very effective ). The width of the trap-way is another element that is significant. The trap-way enables waste to pass from this toilet bowl. Generally, the bigger the snare the greater (a fantastic trap-way size is approximately 2-1/8 inches). Water intake is also important. 1.6 gallon-per-flush is the universal guideline in regards to water use. But most businesses like TOTO have diminished the water level to 1.28 GPF. The huge majority of TOTO bathrooms are environmental friendly and don't undermine flushing skills. In flushing efficacy they are rated at the top. Here is source: How to choose the best flushing toilet | Reviews & buying guide - medium


The height on bathrooms is between 14 to 15 inches on the peak of the bowl. But most brand new flushing toilet versions are coming from"relaxation" or"ADA" elevation (16.5 inches and over ). The chair that is greater makes it more comfortable to chair on the toilet and is essential for people who suffer with knee injuries or have trouble.

Color & Design:
Be certain that you receive a bathroom that matches with another ceramic fixtures in the bathroom (bathtub, sink, vanity counter top, tile, etc). This is particularly important whether the bathroom is adjacent to one of those fixtures. Additionally, check your new bathroom design will match nicely with the general feel of the completed bathroom (contemporary, modern, transitional or conventional ).

Solutions for a Toilet Flapper Which Won't Close

The symptom will be a flush from the toilet bowl, if your toilet flapper won't shut. After the flapper won't shut, the cause may be: a). The flapper adheres to the blood pipe; the flapper is adjusted contrary to the overflow pipe rather than bobbing whatsoever; b). Water and air is keeping up the flapper coming up through the valve seat. Notice: This can be evident once the flapper is shifting and drifting across the chair but won't fall all of the way down till the water level rises in the tank; c). The water in the fill valve may push the flapper to a side or keep it open; d) The series is grabbing on the lever arm and also the series is becoming tangled maintaining the flapper open; electronic ). The lever is sticking and old and consequently it retains the flapper available; and f). This flapper's plan retains the flapper open till the tank is drained. If the flapper sticks into the over flow tube, use a fingernail file onto the flapper framework in which it touches the blood flow pipe (typically over the clips which attach to the poles on the over flow tube ). Enough of this framework so that they don't touch. You might put Vaseline on the clips. Flush a Couple of times to test.

If the water flow is keeping up the flapper in the refill, you'll see bubbles. Glue the angle of the water stream in the angle connector so that it strikes at the interior the over flow pipe. This will permit the flow of water permit the flapper and to run down the walls of the pipe. For more flushing toilets:

Flow in the fill valve water keep it open or even may a flapper. It is possible to turn the shank of the valve, so the flow of water can be flush to test and diverted around the flapper region.

If the series is currently grabbing on the lever arm and as a result a cure is for this particular condition. We advise that you reduce it to 2/3rds the length of the string and use a drinking straw. Attach on the chain. This is going to keep the chain. The flapper will open and shut. If the lever is sticking and old, replace it.

You might have the flapper from the tank if you're currently obtaining a flush. Even a 3.5 gallon per flush or bigger bathroom, (pre-1994) retains the flapper open till the tank is drained. It's very likely that you want a 1.6 gallon per flush kind flapper that's flexible.
Last edited by producer123 on Thu Sep 27, 2018 1:13 am, edited 1 time in total.
User avatar
Posts: 326
Joined: March 12th, 2007
Location: Austin, TX
Reputation: 83

Re: Is there a FoF thats not laggy?

Postby siavash » Tue Apr 17, 2018 11:48 pm

I guess FoFiX is what you want, but honestly everyone has moved onto Clone Hero now. All the FoF customs are compatible with Clone Hero.
Ruler of Chatrooms
User avatar
Posts: 3946
Joined: August 29th, 2006
Location: Just off the coast of Saturn
Reputation: 15

Re: Is there a FoF thats not laggy?

Postby nobby76 » Wed Apr 18, 2018 12:20 pm

Asking which version ISNT laggy is rather a subjective question, its like asking which is the best.. That is purely an individual person thing. I ran most versions of standard FoF and never had any issues with lagging or stuttering. Some people have tried most versions and had lagging and stuttering on each of them. Its is entirely down to your computer, its hardware and software. You might have an app or a plugin or something that might be causing problems between FoF and your computer.

And for the record. 1.2.451 (either with or without RFmod) is considered the most stable version of Fof you can get. We even recommend if you have a newer version than that, to get rid of it and DL 1.2.451 as it will usually work better for people.

But there are newer and better programs out there that do the same kind of thing. As mentioned before Clone hero is one. Phase shift is another, Fofix is another
Last edited by nobby76 on Wed Apr 18, 2018 12:22 pm, edited 1 time in total.
Check out the Tutorial Making songs without having to fret a single note And come check out the IRC Chatroom

Return to “General FOF Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests